Stand-alone exhaust gas analyser
CAP3201 G

Stand-alone unit

Workshops | Repair

The mutligaz CAP3201 controls the emissions of all gasoline, LPG or CNG vehicles. It is suitable for cars, mopeds, motorcycles, quads and forklifts.

You can carry out pre-inspection measurement or flue gas analysis thanks to the dual mode : multi-gas analysis and technical control.

  • LCD Screen
  • Built-in thermal printer
  • Mobile trolley
  • RPM inductive and piezo sensor
  • NOx analysis function (option)

Gasoline motors

Multigas

Designed for workshops and PTI centers, the CAP3201 analyzes emissions from gasoline, LPG and CNG engines: cars, mopeds, motorcycles, light commercial vehicles, forklifts.

4 gas concentration :
- Hydrocarbon (HC)
- Oxygen (O2)
- Carbon monoxide (CO)
- Carbon Dioxide (CO2)

You can upgrade it with Capelec smokemeter module to obtain a Combined petrol and diesel emission analyser.

Test reports can be printed on the thermal printer.

If needed, it can be associated with options and additional modules: RPM, EOBD, opacity cell CAP3030.

Analyseur multigaz opacimetre

GAS ANALYZER
for petrol, GPL

Dual mode Diagnostic
Vehicle inspection PTI

Concentration measurement - Hydrocarbon (HC) - Oxygen (O2) - Carbon monoxide (CO) - Carbon Dioxide (CO2)

Preheating < 9 minutes at 0°C (1 minute minimum) for optimal performance

Operation temperature -10°C to 55 °C

Response time < 5 seconds

Atmospheric pressure 750 mBar to 1150 mBar

Lambda rate 0 to 9,99

Measurement and transmission

CAP8533 Vibration tachometer, RPM

CAP8520 Battery tachometer, RPM

CAP1330 IR remote temperature probe

Accessories

PRO0303 Remote support for gas analyzer probe

APPROVALS AND CERTIFICATIONS

Gas analyser MID ( 2014/32/UE)
OIML R 99
ISO 3930
BAR97 (bench)

COMMUNICATION PROTOCOLS

Standards ASA Net
GIEG Lan
OTC Lan

PERIODICAL TECHNICAL INSPECTION

Control of regulatory pollution thresholds: gasoline, LPG, CNG

CAR REPAIR SHOP & GARAGES

Control of combustion quality
Compliance with regulatory thresholds

MANUFACTURERS & INDUSTRIALS

Checking compliance with gas emission thresholds

• PTI inspection centers
• Workshops and car repair centers
• Automotive industries

Découvrez aussi

HGV brake tester Capelec HGV brake tester Capelec PTI center Capelec Brake testers Capelec suspension and side slip testers Capelec PTI test lanes Capelec

You have a project ?

Capelec supports you in implementing your center and provides you with fully equipped test lanes: : gas analyzer and smokemeter, EOBD reader, tachometer, brake, suspension and side slip testers, and headlight tester.

Design

Design

Innovation Evolutions Adaptation

Capelec Design & manufacturing

Manufacturing

Since 1989

Capelec supply

Supply

An approved network at your disposal